Free Repair Quotes
x
Search
Repairs and Service For

Other Shaft Configurations

Sort by:
«12»

Servo Lab Capabilities

We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motors

Servo Lab Repair Procedures

  1. Data

    Motor nameplate data is recorded

  2. Inspection

    A visual inspection of any damage to the motor.

    We check for
    • Damaged Leads/Terminals
    • Worn output shaft/keyways
    • Cracks in end bells or covers
  3. Job Ticket

    We complete to full write up off all motor data

    Including
    • All winding tests (Resistance, Meg Ω, Continuity)
    • All bearing sizes
    • All seal sizes
    • Brake torque tests (Record Torque, winding resistance)
    • Feedback Tests (Tachometer/Encoder)
  4. Motor Disassembly

    • Bearing and seal sizes are recorded
    • Bearing fits are measured on shaft and End bell
    • Brake torque is measured as well as resistance and Meg Ω
    • More winding tests are performed (Surge and HiPOT tests)
    • Stator is then washed and baked in oven
    • Magnets are inspected for cracks or if loose on shaft
    • Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
  5. Assembly

    • New bearings are installed
    • New seals are installed
    • If required, new windings are impregnated
    • Brakes are rebuilt or replaced depending on manufacturer design.
    • Rebuilt or New encoders are installed and aligned using:
    • (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
  6. Rotor Balancing and Testing

    • Rotor is run through a full vibration diagnostic
  7. Run Testing

    • Every Motor is Run for a minimum of 1 hour using one of our drives.
    • We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
  8. Service Report

    • A Final 3-page Service Report is filled out
    • Pinout diagram for power and feedback is provided
    • Brake torque is recorded a final time for our Service Reports
    • A photo of nameplate and motor is attached
    • A motor tag is installed on motor with QR code linking Service Report and Job Histories
    • If requested, a YouTube link is attached to the service report of motor
FANUC A06B-03134B755 Servo Motor Get a Repair Quote
FANUC A06B-0313-B201 Servo Motor Get a Repair Quote
FANUC A06B-0313-B202 Servo Motor Get a Repair Quote
FANUC A06B-0313-B203 Servo Motor Get a Repair Quote
FANUC A06B-0313-B204 Servo Motor Get a Repair Quote
FANUC A06B-0313-B205 Servo Motor Get a Repair Quote
FANUC A06B-0313-B206 Servo Motor Get a Repair Quote
FANUC A06B-0313-B210 Servo Motor Get a Repair Quote
FANUC A06B-0313-B231 Servo Motor Get a Repair Quote
FANUC A06B-0313-B232 Servo Motor Get a Repair Quote
FANUC A06B-0313-B233 Servo Motor Get a Repair Quote
FANUC A06B-0313-B234 Servo Motor Get a Repair Quote
FANUC A06B-0313-B235 Servo Motor Get a Repair Quote
FANUC A06B-0313-B236 Servo Motor Get a Repair Quote
FANUC A06B-0313-B241 Servo Motor Get a Repair Quote
FANUC A06B-0313-B242 Servo Motor Get a Repair Quote
FANUC A06B-0313-B243 Servo Motor Get a Repair Quote
FANUC A06B-0313-B244 Servo Motor Get a Repair Quote
FANUC A06B-0313-B245 Servo Motor Get a Repair Quote
FANUC A06B-0313-B246 Servo Motor Get a Repair Quote
FANUC A06B-0313-B251 Servo Motor Get a Repair Quote
FANUC A06B-0313-B254 Servo Motor Get a Repair Quote
FANUC A06B-0313-B255 Servo Motor Get a Repair Quote
FANUC A06B-0313-B259 Servo Motor Get a Repair Quote
FANUC A06B-0313-B261 Servo Motor Get a Repair Quote
FANUC A06B-0313-B262 Servo Motor Get a Repair Quote
FANUC A06B-0313-B263 Servo Motor Get a Repair Quote
FANUC A06B-0313-B264 Servo Motor Get a Repair Quote
FANUC A06B-0313-B265 Servo Motor Get a Repair Quote
FANUC A06B-0313-B266 Servo Motor Get a Repair Quote
FANUC A06B-0313-B267 Servo Motor Get a Repair Quote
FANUC A06B-0313-B268 Servo Motor Get a Repair Quote
FANUC A06B-0313-B269 Servo Motor Get a Repair Quote
FANUC A06B-0313-B271 Servo Motor Get a Repair Quote
FANUC A06B-0313-B272 Servo Motor Get a Repair Quote
FANUC A06B-0313-B273 Servo Motor Get a Repair Quote
FANUC A06B-0313-B274 Servo Motor Get a Repair Quote
FANUC A06B-0313-B281 Servo Motor Get a Repair Quote
FANUC A06B-0313-B284 Servo Motor Get a Repair Quote
FANUC A06B-0313-B701 Servo Motor Get a Repair Quote
FANUC A06B-0313-B702 Servo Motor Get a Repair Quote
FANUC A06B-0313-B703 Servo Motor Get a Repair Quote
FANUC A06B-0313-B704 Servo Motor Get a Repair Quote
FANUC A06B-0313-B705 Servo Motor Get a Repair Quote
FANUC A06B-0313-B706 Servo Motor Get a Repair Quote
FANUC A06B-0313-B710 Servo Motor Get a Repair Quote
FANUC A06B-0313-B731 Servo Motor Get a Repair Quote
FANUC A06B-0313-B732 Servo Motor Get a Repair Quote
FANUC A06B-0313-B733 Servo Motor Get a Repair Quote
FANUC A06B-0313-B734 Servo Motor Get a Repair Quote
FANUC A06B-0313-B735 Servo Motor Get a Repair Quote
FANUC A06B-0313-B736 Servo Motor Get a Repair Quote
FANUC A06B-0313-B741 Servo Motor Get a Repair Quote
FANUC A06B-0313-B742 Servo Motor Get a Repair Quote
FANUC A06B-0313-B743 Servo Motor Get a Repair Quote
FANUC A06B-0313-B744 Servo Motor Get a Repair Quote
FANUC A06B-0313-B745 Servo Motor Get a Repair Quote
FANUC A06B-0313-B746 Servo Motor Get a Repair Quote
FANUC A06B-0313-B751 Servo Motor Get a Repair Quote
FANUC A06B-0313-B754 Servo Motor Get a Repair Quote
FANUC A06B-0313-B755 Servo Motor Get a Repair Quote
FANUC A06B-0313-B759 Servo Motor Get a Repair Quote
FANUC A06B-0313-B761 Servo Motor Get a Repair Quote
FANUC A06B-0313-B762 Servo Motor Get a Repair Quote
FANUC A06B-0313-B763 Servo Motor Get a Repair Quote
FANUC A06B-0313-B764 Servo Motor Get a Repair Quote
FANUC A06B-0313-B765 Servo Motor Get a Repair Quote
FANUC A06B-0313-B766 Servo Motor Get a Repair Quote
FANUC A06B-0313-B767 Servo Motor Get a Repair Quote
FANUC A06B-0313-B768 Servo Motor Get a Repair Quote
FANUC A06B-0313-B769 Servo Motor Get a Repair Quote
FANUC A06B-0313-B771 Servo Motor Get a Repair Quote
«12»
ISO 9001:2000 Registered Electrical Apparatus Service Association
A&C Electric is a certified distributor service center.

A&C Electric Company specializes in servo motor repairs, industrial motor repairs, motor refurbishing and new motor sales. Save money on motor repairs and reduce your downtime with fast send-in comprehensive industrial and electric motor testing and motor repairs. A&C Electric Company services Harrison Township MI, Detroit MI, Warren MI, Lansing MI, Clinton Township MI, Flint MI, Ann Arbor MI, Troy MI, Grand Rapids MI and Toledo OH.

© 2024 A&C Electric Company.All Rights Reserved
41225 Irwin Rd, Harrison Township, MI 48045 USA
Please enable Javascript for full website functionality.