THREE PHASE
Sort by:
EJMM3711T-G
$1,790.92
EJMM3312T-G
$1,819.36
EJMM3313T-G
$1,796.42
EJMM2394T-G
$3,103.15
EJMM3314T-G
$2,273.26
EJMM2513T-G
$2,571.29
EJMM4106T-G
$3,390.18
EJMM3714T-G
$1,955.98
EJMM2333T-G
$3,078.41
EJMM2334T-G
$3,438.79
EJMM3710T-G
$1,700.14
EJMM3709T-G
$1,591.01
EJMM3311T-G
$1,679.05
EJMM3312T
$1,626.78
EJPM3312T
$1,626.78
EWCM3312T
$1,594.68
EJMM3313T
$1,557.08
EJPM3313T
$1,557.08
EJMM2511T
$2,729.94
EJMM3312T-5
$1,626.78
EJMM3313T-5
$1,839.53
VEJMM3312T
$1,626.78
VEJMM3313T
$1,542.41
EJMM3314T
$2,181.56
EJPM3314T
$2,181.56
EWCM3314T
$2,149.48
EJMM2513T
$2,302.62
EJPM2513T
$2,302.62
EJMM2524T
$3,582.76
VEJMM3314T
$2,181.56
EJMM2514T
$2,561.21
EJPM2514T
$2,561.21
EJMM2515T
$2,758.36
EJPM2515T
$2,758.36
EJMM2516T
$3,299.40
EJPM2516T
$3,299.40
EJMM2531T
$3,281.06
EJPM2531T
$3,281.06
EJMM2538T
$4,806.04
EJPM2538T
$4,806.04
EJMM2539T
$5,105.90
EJPM2539T
$5,105.90
EJMM2542T
$5,344.33
EJPM2542T
$5,344.33
EJMM2543T
$5,534.15
EJPM2543T
$5,534.15
EJMM2546T
$6,506.17
EJPM2547T
$6,832.62
EJPM2551T
$8,141.18
EJMM3314T-5
$2,181.56
EJMM2534T
$3,906.47
EJPM2534T
$3,906.47
EJMM2535T
$3,959.64
EJPM2535T
$3,959.64
EJMM3309T
$1,636.87
EJMM3311T
$1,572.67
EJPM3311T
$1,572.67
EJMM2506T
$2,249.42
EJMM3311T-5
$1,572.67
EJMM3711T
$1,668.05
EJPM3711T
$1,668.05
EWCM3711T
$1,635.95
EJMM3714T
$1,716.65
EJPM3714T
$1,716.65
EWCM3714T
$1,646.94
EJMM3711T-5
$1,668.05
EJMM3714T-5
$1,679.05
EJMM3713T
$2,337.46
EJPM3713T
$2,227.43
EWCM3713T
$2,195.33
EJMM2394T
$2,965.61
EJPM2394T
$2,965.61
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
A&C Electric is a certified distributor service center.