TEFC
Sort by:
EJPM3711T
$1,668.05
EJPM3714T
$1,716.65
EWCM3714T
$1,646.94
EJMM2394T
$2,965.61
EJMM2333T
$2,809.72
EJMM2333T-5
$2,769.38
EJMM2334T
$3,218.71
EJPM2334T
$3,218.71
EJPM4107T
$3,626.77
EJMM4104T
$5,313.13
EJPM4109T
$5,647.84
EJPM4114T
$6,860.11
EJPM3709T
$1,649.70
EWCM3709T
$1,617.61
EJMM3710T
$1,522.22
VEJMM3710T-5
$1,522.22
VEJMM3714T
$1,786.33
VEJMM2333T-5
$2,769.38
VEJMM2334T-5
$3,218.71
VEJMM3710T
$1,542.41
VHECP3663T
$2,835.40
VHECP3665T
$2,618.05
VLECP3665T
$1,658.88
VHECP3771T
$3,501.14
VHECP3774T
$3,645.12
VLECP3774T
$2,268.68
VHECP2394T
$4,035.76
VLECP2394T
$3,693.72
VHECP4106T
$4,388.81
VHECP2334T
$4,751.02
VLECP4106T
$3,919.31
VLECP2334T
$3,946.80
VHECP4107T
$4,666.64
VHECP4103T
$5,300.30
VLECP4107T
$5,270.04
VLECP4103T
$5,314.07
VHECP4104T
$5,947.72
VLECP4108T
$5,892.71
VHECP4110T
$6,726.26
VLECP4110T
$7,685.44
VHECP4114T
$8,814.26
VHECP4115T
$9,502.03
VPECP4114T
$5,895.44
VPECP4115T
$5,684.51
VHECP4310T
$11,260.85
VPECP4310T
$8,282.41
VPECP4314T
$8,178.79
VHECP4313T
$14,068.72
VHECP4316T
$14,315.40
VPECP4316T
$9,563.47
VLECP3770T
$2,100.88
EJMM3711T-5
$1,668.05
EJMM3713T
$2,337.46
EJMM3714T
$1,716.65
EJMM3714T-5
$1,679.05
EJMM4103T
$3,756.97
EJMM4107T
$3,626.77
EJMM4109T
$5,647.84
EJMM4110T
$6,166.88
EJMM4114T
$6,860.11
EJPM2333T
$2,809.72
EJPM4104T
$5,313.13
EJPM4106T
$3,191.18
EWCM3711T
$1,635.95
VEJMM2334T
$3,218.71
VEJMM3709T
$1,649.70
VHECP2333T
$4,183.39
VHECP3769T
$3,357.17
VHECP3770T
$3,248.96
VHECP4314T
$11,755.13
VLECP3663T
$1,838.62
VLECP3769T
$2,153.14
Servo Lab Capabilities
We have documented 96 different Servo Manufacturer repair reports in our Database
We repair AC Servos, DC Servos, AC Spindles, and AC Actuators
Capable of 24-hour repairs in many cases
We have thousands of spare and rebuilt motors in our inventory for parts or exchange motorsServo Lab Repair Procedures
-
Data
Motor nameplate data is recorded
-
Inspection
A visual inspection of any damage to the motor.
We check for- Damaged Leads/Terminals
- Worn output shaft/keyways
- Cracks in end bells or covers
-
Job Ticket
We complete to full write up off all motor data
Including- All winding tests (Resistance, Meg Ω, Continuity)
- All bearing sizes
- All seal sizes
- Brake torque tests (Record Torque, winding resistance)
- Feedback Tests (Tachometer/Encoder)
-
Motor Disassembly
- Bearing and seal sizes are recorded
- Bearing fits are measured on shaft and End bell
- Brake torque is measured as well as resistance and Meg Ω
- More winding tests are performed (Surge and HiPOT tests)
- Stator is then washed and baked in oven
- Magnets are inspected for cracks or if loose on shaft
- Encoder is tested with either (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Assembly
- New bearings are installed
- New seals are installed
- If required, new windings are impregnated
- Brakes are rebuilt or replaced depending on manufacturer design.
- Rebuilt or New encoders are installed and aligned using:
- (Heidenhain PWM20, Sick PGT-11, or Mitchell Electronics equipment)
-
Rotor Balancing and Testing
- Rotor is run through a full vibration diagnostic
-
Run Testing
- Every Motor is Run for a minimum of 1 hour using one of our drives.
- We use Siemens S110, S120, IndraDrive, AB Kinetix 300, Yaskawa 7, and AMC drives
-
Service Report
- A Final 3-page Service Report is filled out
- Pinout diagram for power and feedback is provided
- Brake torque is recorded a final time for our Service Reports
- A photo of nameplate and motor is attached
- A motor tag is installed on motor with QR code linking Service Report and Job Histories
- If requested, a YouTube link is attached to the service report of motor
A&C Electric is a certified distributor service center.